Self-adhesive Films

Signolit SC 42

Permanent acrylic self-adhesive polyester film with a paper release liner. Ideal for stickers, signs, decals and posters. It is tear resistant and can be used in internal or external conditions. The imaged film has outstanding toner bonding and water resistance.

Printing Systems


Art. NumberWidth (mm)ThicknessLength (m)
38042.050.393009140.050 mm50PDF

Technical data


  • High brillance of colours
  • Good scratch resistance
  • Tear resistant
  • Universal use
  • Weather proof prints


  • Clear glossy
  • self-adhesive with paper backing


Release linersiliconized paper
Width (mm)914
Thickness of carrier material 0.050 mm
Adhesion strength~ 3.5 - 5.0 N / 25 mm (A.F.E.R.A.), after 24 h ~ 10 N / 25 mm (A.F.E.R.A.)
Type of adhesivedispersion
Length (m)50
Temperature rangeglued +5°C up to +80°C
Base MaterialPET film
Total thickness0.150 mm
Packing quantity 1 roll


  • Suitable for most toner-based label roll printers.


  • Printing: Before printing, the film has to be conditioned in the print room to
    equalize the temperature of the material on the room temperature. After printing, the roll should be removed from the printer and stored in its original packing.
  • Surface Protection: Signolit SC can be used outdoor without lamination. However, the surface must be protected in order to improve weathering resistance or if the film is subject to any mechanical influences. In this case you should use self-adhesive laminating foils. If silicon oil is added depending on the type of machine this may influence the adherence of the laminating foil on the film’s surface. It is necessary to make some tests on a sample sheet before further processing.
  • Adhesing: Signolit SC will stick to any solid, smooth surfaces which are dry and free of dirt, oil, silicon etc. If applied onto curved surfaces please be aware that label lift off can occur especially if the radius is tight. It is up to the user to test for there own suitability/application, due to the wide variety of surfaces, applications & desired results. Gluing on low-energy surfaces such as LDPE PE PP will be not recommended. The temperature during the application must reach at least 15°C.


  • Shelf life: 1 year after delivery
  • In its original packing at 20-25°C, 45-55% humidity.